How To Maintain & Keep Running Infrequently Used Engines

In an era when gas is expensive and boat engine maintenance costs are continuing to rise, many boats will choose to install more fuel efficient engines which require significantly less use. This can create an issue when trying to keep those infrequently – used engines running properly. Infrequently used boat engines do not get regular maintenance and can be severely neglected, causing excess wear and tear on all moving parts. Running engines of this sort requires preventive care as well as accurate diagnostics to keep them running smoothly. Our goal is to give users the Boat Parts from PartsVu and information needed to maintain their infrequently used boat engines properly.

Fuel Management

To maintain your boat’s fuel properly, it’s a good idea to start by keeping the tank full. If you plan on storing the boat for some time, it’s best to fill up the tank completely so that any water that enters it will be diluted by more fuel than just a drop or two at a time. Make sure not to overfill your tank, however—this can cause damage when it expands due to heat or water pressure.

If you’re going to store your boat for an extended period, consider getting rid of any unused fuel by draining it from both tanks and pouring it into containers with tight-fitting lids (like plastic bottles). This will prevent gas from evaporating through evaporation while also preventing water from entering into contact with any remaining fuel inside the tank itself (which could cause corrosion). It’s also important not to let any standing water sit inside either tank during this process; draining them completely will ensure that no moisture remains inside.

Next, you should change the oil every year or two depending on how much use it gets. If it’s not used much at all, then changing the oil once a year should be sufficient; however, if it’s used regularly then changing it every six months may be better suited for your needs.

Finally, clean out any excess dirt and debris from around hoses and other parts so that they don’t cause problems later on down the line such as corrosion or blockages which could lead to an expensive repair bill!

Oil Management

To get the most out of your infrequently used boat engine, you’ll want to keep up with oil management. This will help prevent damage from occurring in your engine, as well as keep it running at peak performance.

The first step is to check the oil level every time you start up your boat. If the level is too low or too high, then you need to add or remove oil accordingly. This will help ensure that there are no leaks and that your engine runs smoothly.

Next, you should change the oil every year or two depending on how much use it gets. If it’s not used much at all, then changing the oil once a year should be sufficient; however, if it’s used regularly then changing it every six months may be better suited for your needs.

Finally, clean out any excess dirt and debris from around hoses and other parts so that they don’t cause problems later on down the line such as corrosion or blockages which could lead to an expensive repair bill!

Cooling System Management

The cooling system of a boat engine is one of its most important systems. Without proper cooling, an engine will overheat and eventually fail. The cooling system helps to keep the engine cool by pumping water through it and then discharging it back into the water. This cycle occurs constantly, keeping your engine at a safe temperature.

There are several parts of the cooling system that you should be aware of:

Water Pump

The water pump circulates water throughout your boat’s engine. It draws water from one side of your boat and forces it through pipes that lead to the other side where it is discharged back into the water.

Overflow Tank

An overflow tank contains coolant fluid when there is too much pressure in the radiator cap or if there are any leaks in your cooling system. The coolant fluid will overflow into this tank until there is enough pressure to return to circulation once again.

Electrical Systems

The electrical system on your boat is a complex web of wires, fuses, and switches that is designed to ensure that your boat runs smoothly and safely. If your boat’s engine is not running correctly, it may be due to a problem with the electrical system. A good way to check for problems with your electrical systems is by using an onboard voltmeter. This device can be used to test for the voltage drop along any given wire or cable. Keep in mind that if you have multiple batteries connected (as in most boats), then each battery should be tested individually by attaching the voltmeter’s probes directly onto each terminal post of each battery (one probe per terminal). The voltmeter should then be plugged into an outlet that has been turned off and unplugged from its power source before proceeding with testing.

If there are any discrepancies found during testing between any two terminals (i.e., one terminal has less voltage than another), then this could indicate a problem within the system itself – such as loose connections between components or faulty wiring somewhere along the line due to corrosion or wear-and-tear over time!

Engines and Batteries – Maintain Infrequently Used Boat Parts from PartsVu

PartsVu is an online marketplace for aftermarket parts for boats. We have a wide selection of parts for many different types of boats, including inflatables and personal watercraft. With our easy-to-use search tool, finding the right part is simple—just enter some information about your engine here on our site and we’ll find exactly what you need!

We offer affordable prices on all the Boat Parts from PartsVu thatyou need for your infrequently used engine maintenance needs. On top of that, we offer free shipping on orders so you don’t have to worry about paying those extra fees when it comes time to order more parts. And with our website, ordering has been easier than ever!

So what are you waiting for? Order today and start saving money on your infrequently used engine maintenance needs!