Each LED on your Nighthawk router is unique. The LED on your WiFi router’s green and stable means that everything is fine and there are no problems. If the Nighthawk router’s light is flashing red it is likely that the router isn’t receiving enough power. If the router’s LED flashes amber or orange, it could be a sign that the Netgear Nighthawk firmware update failed.
Do you worry about the solution? Let’s get rid of all those worries. This article will show you how to troubleshoot the problem quickly. You can resolve the problem by following the Netgear Router troubleshooting steps below.
Let’s get started!
Fixed: Nighthawk Router orange Light Issue
Check Your Internet Connection
Poor WiFi connections are one of the most common causes of Nighthawk router’s orange light problem. Before you look for other troubleshooting tips and tricks, make sure to check your internet connection. How? Get in touch with your ISP! If your internet service provider isn’t responsible for the problem, you can try the following tip.
The Ethernet Connection of Course
If there is no or weak Ethernet connectivity between your Nighthawk router router and modem, the orange LED issue with Nighthawk routers can also continue. A damaged Ethernet cable cannot make an Ethernet connection between your modem and router secure and secure.
How do you fix the problem? Make sure you use the best Ethernet cable to connect them (modem, router). The connection must also be strong and stable.
Is the issue with the orange LED on the Nighthawk router fixed? No? No? We have already discussed that the Netgear firmware update was unsuccessful and can also cause an orange light problem.
You can update your Nighthawk router’s firmware by visiting the Netgear firmware page.
Note If you still experience the same problem after updating your router’s firmware, there is a good chance that it (firmware), doesn’t need to be updated.
Reset Nighthawk Router
Nighthawk router configuration errors can also cause the most annoying and frustrating orange light issue. You don’t need to be worried! You can fix the problem by first resetting your Nighthawk router, then reconfiguring it again.
To reset the Nighthawk router simply press the reset button on the Nighthawk router and hold it for a while before releasing it. Your Nighthawk router will automatically reset in a flash.
Resetting the Nighthawk router will fix half of the problem. Reconfigure the Nighthawk router to fix the problem completely. How? Simply visit the setup page by using the default Netgear Nighthawk Router login username, and password. For complete Nighthawk router setup instructions, enter your model/ serial number.
Bonus!
You can also find technical issues that could cause your Nighthawk router not to work properly. To get rid of technical issues, you need to give your Nighthawk router an update every 10-15 days. Unplug your Nighthawk router and wait for it to cool down before plugging it back in.
We hope this article and the solutions provided here will help you resolve the “Nighthawk Router Orange Light” problem. We would like to add one more tip. Continue to change the Netgear router username password. Doing this will protect your Netgear Nighthawk router against unauthorized persons.
We are grateful for your 5-minute read!
Also check: 5 California Water parks You Didn’t Know Existed