How to Remove Epson Printer Error Code 0x97?

Epson Error Code 0x97 is a warning sign that your Epson printer is experiencing an internal problem. This error can be caused by a motherboard or other internal component failure. This error causes your printer to stop printing any information that could prevent you from completing a crucial task. This article will help you to resolve Epson printer error 0x97.

How To Fix Epson Printer Error Code 0x97?

This often happens on the following models: Epson WF-3640 and WF-4630, Epson WF-3620, and WF-7620. Follow these steps to fix error code 0x97 in your Epson printer.

Method 1# Unplug and Plugin:

  • To begin, unplug all cables that are connected to your printer.
  • Now, remove all cartridges from the printer.
  • Turn off the power source of your printer by pulling the power cable down.
  • Next, connect all cables to the USB cable.
  • Install the ink cartridge into the printer.
  • Turn the power off and see if it still shows the error code
  • Verify that the error message does not persist. Continue to the next step if the error message persists.

Method 2# Other Method to Unplug or Plug-in:

  • Please turn off the Epson printer and unplug it from the power source.
  • Disconnect the USB cable from the computer.
  • Wait for about five minutes before the printer goes to sleep.
  • Hold the power button for less than one minute on your printer.
  • Connect the power cord to the printer, then press the Power button.
  • Check if the message appears again.

Method 3# Clear the blocked printer nozzle:

  • Please turn off the printer and unplug it from your computer’s power supply.
  • Open the printer housing carefully.
  • Next, take a paper towel and use any scalp shampoo.
  • Next, place the paper towel dampened between the printheads.
  • Let it sit for 12 hours; then, you can check to see if the error code has not reappeared.

Method 4# Microsoft’s Printer Troubleshooter:

Microsoft offers many troubleshooting tools to help printers. You can use any one of them, depending on the issue you are having with your printer. It can be downloaded from the Microsoft official website depending on your printer model or your computer’s operating systems. Run it on your computer, and you can resolve many problems, including Epson printer error code 0x97.

Method 5# Turn on your printer and turn it off.

Sometimes, turning off and on the printer can fix technical issues such as error code 0x97. This can be done as follows:

  • Unplug all USB cables from your printer.
  • For approximately 60 seconds, press and hold down the power button on your printer. This will reset the printer.
  • Reconnect all accessories.
  • Next, hold down the power button for 60 seconds. Then, run a test print.

Method 6# Disconnect the printer and reconnect it:

  • Make sure there’s no paper jam, and then wipe it off.
  • Disconnect all USBs and cables from your printer.
  • Hold the Power button for less than one second and then release it.
  • Wait about 1 minute, then connect the accessories to your printer.
  • Turn on your printer and then run a functional test.

The Epson printer error code 0x97 is easily fixed by following these steps. Contact the Epson technician team for assistance. They will help you resolve any Epson printer problems.


Also Read: Updated Methods to Solve Brother Printer Offline Issue