How Using a Remanufactured Compressor Can Be Beneficial

Compressor Scrap:

Compressor scrap is any air conditioning or refrigeration compressor that someone broke and then collects to sell as scrap metal. Most of the time, the compressors are kept away from other pieces of scrap metal for many reasons. The first is that oil and leftover refrigerant gas could be in the compressor housings. It could make them dirty. Despite that, wholesale compressor scrap can benefit you in many ways.

The second problem is that compressors are sealed units. It contains more than one type of metal which means that they need a different billing system. It is scrap metal which only has one type of metal. Most of the time, aluminum, steel, cast iron, and copper are among these metals.


Compressors for air conditioning and refrigeration tend to last a long time. Despite that, they do break down and stop working at some point. When this happens, we usually put them through a compressor salvage system that sells them as compressor scrap, a type of salvaged metal. 

Since compressors are sealed units that often still have traces of refrigerant gas and lubricating oil, they are usually kept away from other scrap metal and stored in groups. In fact, many wholesale compressor scrap shops only buy and sell compressor parts. These shops are usually better equipped to handle the special needs of compressor disposal.


The different kinds of materials that go into making a compressor is another reason why compressor scrap differs from other kinds of scrap metal. Most compressor parts, including the outside casing, bolts, fasteners, and piston rings, are steel. Most pistons are made of an aluminum alloy, while white metal to make a number of bearings. 

The motor that drives the compressor will have parts made of steel and aluminum, as well as a lot of copper wire. This wide range of metals requires a different billing system than that used for cleaning. This means that we need to handle the compressor scrap as a separate entity.

Benefits of Using a Remanufactured Compressor:

The HVAC system is an important part of daily business in almost every commercial or industrial building. Because of this, productivity often goes down when the HVAC system isn’t running at full capacity. There are many reasons why an HVAC system might stop working on a hot summer day. During that, the most common one is a broken compressor. When we need to replace a compressor in an HVAC system, contractors and building owners have three main options. It includes a new compressor from the original equipment manufacturer (OEM), a remanufactured AC compressor, or a rebuilt compressor.

Price and Promise:

One of the best reasons to choose a remanufactured compressor is that it costs less. But a remanufactured AC compressor will not only cost less at first than a new one from an OEM. It will also come with the same warranty that many OEMs do.

At Importer TradeKey, for example, all of the commercial compressors we remanufacture and sell come with a 12-month limited warranty. All of the parts we use in our products are carefully checked, cleaned, machined, and/or upgraded to meet or even beat the latest OEM standards and tolerances. We swap out any parts that don’t meet the requirements for new ones. Also, any worn-out parts or parts that wear out quickly, like bearings, O-rings, seals, and valves, are always replaced with new parts, even if they are still in good shape.

Also, we carefully check and test all the parts, including the rods, pistons, and crankshaft, to make sure they meet the most recent OEM standards. The valve plates, stator, compressor casting, and the walls of the cylinders all go through the same inspections and tests for tight tolerances.


With the need for more eco-friendly options growing, remanufactured AC compressors are a way for commercial and industrial facilities to become green.

Because a new commercial compressor needs all new parts, making one usually takes a lot of energy. On the other hand, making a remanufactured compressor with different new parts takes a lot less energy. Remanufacturing saves energy and keeps millions of tonnes of CO2 from being made every year. It also keeps millions of pounds of trash out of our landfills. That’s because a remanufactured compressor usually keeps the old casting and a lot of other usable parts out of landfills. This helps the environment a lot more than if different parts were thrown away as scrap.

Even though we throw out a lot of the parts that are melted down and used again, the process takes a lot of energy. On the other hand, reusing compressor parts gives different parts at least a second chance at life. It also reduces the need for raw materials like iron, copper, and aluminum that are needed to make new parts. All of these things make a remanufactured compressor a better choice for the environment than a brand-new compressor.


Compressor scrap is also a threat to the environment just like any other contaminated scrap material. In most countries, this means that we need to store and throw away the scrap in a way that is different from how we handle other types of scraps. People who store and take apart old compressors should always be aware of these risks. They should also take steps to protect themselves and the environment from being exposed to compressor oil more than necessary. Technicians and repair workers should also get rid of compressors that they can’t fix in a responsible way, preferably at a place that handles compressor scrap.